How to Remove the Key From the Keyway?

Preparation Work

1. Preparation tools: vise (any clamp that can tighten or clamp the key can be used)

2. Check parts: Verify the number and type of parts and make sure all parts are complete and intact.

Keyed shaft installed

Disassembly Steps

1. Place the key down on the jaws and clamp

2. Pull out with force

Precautions for Disassembly

1. Follow the instructions
2. Be careful to avoid damaging the shaft surface when clamping
3. Ensure safety: During installation, be sure to pay attention to safety to avoid injury.

Updated on: 05/10/2023